Burs by material, not by brand
Milling burs on this site are organised by the material they mill: zirconia, ceramic glass, PMMA and metal. That organisation matches how a laboratory actually chooses a bur, because the material being cut decides the bur more than any brand name does. A technician reaching for a zirconia bur does not need a brand catalogue first; the technician needs a bur that mills zirconia on the holder and machine in front of them, and the burs page is written around that need.
Third-party names appear on the burs pages only as compatibility references from the source listings, such as VHF and Cerec names on particular bur listings. Those names tell a laboratory which system a bur listing is associated with, and they are not presented as company brands or partnerships. A buyer who sees a third-party name should read it as a compatibility hint to be confirmed in an inquiry, naming the holder and the machine it must fit.
Glaze paste and grinding stones as categories
Glaze paste and grinding stones appear in the company catalogue as category names, and a home page news title also mentions a dental glazing paste. Ask about named products in an inquiry. Both stay at category level. A buyer who needs a glaze paste or a grinding stone can ask about it in an inquiry.
Small items are the ones a laboratory orders most often, so ask about these lines in an inquiry to confirm availability.
The tools showroom image
The tools and consumables showroom image on this page shows glaze paste jars, firing paste, milling burs and fixtures arranged as a range display, with a tools and consumables title. That image is a MIC showroom image, a product publicity image, and its caption says so, rather than presenting it as a factory or bench photograph. The image's job is to show the range at a glance, not to prove a production scene, and no page on this site claims otherwise for any image.
A product publicity image is captioned as one, and a showroom image is captioned as one; no image is captioned as a factory photograph. A buyer who wants factory evidence should ask for it in an inquiry, rather than reading it into a publicity image.
Consumables beside machines
Consumables never stand alone: a bur fits a milling machine, a glaze paste finishes a fired restoration, and a grinding stone adjusts a piece after firing. The tools pages therefore link back to the milling, furnace and material pages they connect with, and a laboratory ordering consumables should name the machine and the material alongside the consumable. That combined question lets the company answer the setup rather than the small item alone, and it avoids a bur that does not fit the holder.
The vacuum cleaner page belongs in the same conversation, because dust extraction runs alongside milling and affects both the machine and the milled surface. A laboratory ordering burs for the first time may want to confirm the extraction combination in the same inquiry, naming the milling machine and the materials to be milled. That single message can then cover the bur, the machine and the extraction question together.
Ordering consumables well
A consumable order should name the consumable, the material it works on, the holder or system it must fit, and the quantity range, and then confirm the minimum order quantity, lead time, shipping method and payment terms as buyer instructions. Those four confirmations vary by order and destination, and this site does not promise them in advance. A laboratory that orders consumables regularly should also note its repeat pattern in the inquiry, so the company can advise on availability for repeat orders.
Small items also benefit from a combined inquiry more than large machines do, because a laboratory rarely needs one bur alone. Listing the burs, pastes and stones needed for a month's work in one message, with the machines and materials they serve, produces a single quotation that can be checked at once, rather than several small quotations arriving on different days. The inquiry form has room for that list, and a buyer should use it.
Where to read more on tools
The milling bur selection guide is the next step for a buyer who wants more than this index gives. It explains the four bur categories by milled material, compares them in general terms, and lists the compatibility questions to confirm in an inquiry, without binding any category to a specification it does not have. Ask for the bur life and cutting speed figures for these lines in an inquiry.
A buyer who has read the guide and still has a consumable question should use the inquiry form, naming the consumable, the material and the holder. The form asks only for a name, an email address and the message, and a message that quotes the guide section it follows will get a faster answer, because the company side can see exactly which comparison the buyer is asking about.